Skip to product information
1 of 23


6 available 32"x79.5" Antique Vintage Old Salvaged Interior Wood Wooden Doors 2 Panels

6 available 32"x79.5" Antique Vintage Old Salvaged Interior Wood Wooden Doors 2 Panels

Regular price $229.99 USD
Regular price Sale price $229.99 USD
Sale Sold out
Shipping calculated at checkout.

* Shipping prices to the Northeastern states may be significantly lower than the flat rate price we have to ship to all parts of the country. Read the "Shipping" section below for more information.

* Although there are 6 doors available, the list price is for 1 door only.
 If you are planning on buying less than 6 doors please look at the dimensions below and message us after the auction to let us know which door(s) you'd like.

* 32"x79.5" title is an estimate   and not all doors are exactly 32"x79.5". Please see exact dimensions below.

Charming, antique doors salvaged from an old home in Northeastern, PA. The doors are made of solid Douglas fir and have (flat) panels on both sides. (Except Door#1 which is stained on one side and painted on the other side & Door#5 which is completely stained), all doors are painted on both sides.

No door is equipped with any  hardware. However, we have a good selection of hardware to outfit them (check  out our store).

* If you would  like the  hardware holes plugged with solid wood, please email us for a quote.

Uneven Height
The heights of Doors#5 & #6 were unevenly cut by 1/4", While the height of Door#4 was unevenly cut by 1/2". The cuts were most likely made to compensate for a warped floor or sagging foundation.  We could cut any door to make it shorter or narrower, or even build it up to  make it taller or wider--message us  for a quote.

Condition: Considering the doors are well at least 100 years old, they are  strong, sturdy  and in great structural condition. They only have nicks and scratches, but no  broken/cracked joints or any other serious issues. Door#2 has a split cross-rail (see 8th photo) as well as a small break on the top rail (see 9th photo). Doors#1 and #5 have warped panels (see photo #4 & #19). Most recessed (flat) panels are made of plywood, which are basically several thin layers of wood glued into a single sheet. Over time, especially if exposed to humidity (bathroom, basement, or kitchen doors), the surface layers of plywood warp and form bubbles.

We could cut the bubbles and re-glue them so they become flat. The scars that remain from the bubbles being flattened could be filled with wood putty or left alone prior to sanding--message us for a quote.

Otherwise, most of the blemishes that  they have will 
disappear after sanding, prior to refinishing or repainting, and whatever remains will be  subtle, "character marks".

Modification: Want to use 2 of these doors to make a pair? We could  also modify the door(s) to fit your opening or suite your  needs. We could make  a frame(s), trim or add to the heights or  widths, replace panels with glass,  reverse the swings, plug the hardware holes, etc. Email us with a small  description of what you would like done, and we'll  give you a quote.

All doors measure 1 3/8" thick)

Door#1: (Right in-swing)
32" x 79 1/4"

Door#2: (Left in-swing)
7/8" x 79 1/2"

(Left in-swing)
32" x 79 1/4"

Door#4: (Left in-swing)
32" x 79 
1/8" - 79 5/8"

Door#5: (Right in-swing)
32" x 79 
1/2" - 79 3/4"

Door#6: (Left in-swing)
7/8" x 79 1/4" - 79 1/2"

Too tall, short,  wide or narrow? We could increase or decrease the height and/or  width--email us for a quote.


Northeastern  VA, MD, DC, DE, PA, NJ, NY, & New England: We  deliver to these states every 2 - 3 weeks . Home  delivery would be $100 - $150 depending on your location. Email  us with the shipping zip code for an exact price.

If you need the item sooner or are located  outside of our delivery range, we could crate and ship with  a commercial freighter--email us for a quote.

Pick up in  Scranton, PA is also welcome. No "pick up" charges applied

Shipping & Returns

View full details